Oven Control Board Replacement Cost: How Much to Pay in 2025

• October 17, 2025
• Gareth Winslow
• 0 Comments

When an electric oven stops heating, shows weird error codes, or the digital display goes blank, the culprit is often the oven control board is a electronic module that manages temperature, timers, and user interface in electric ovens. Replacing that board can feel pricey, but knowing the typical cost range helps you avoid surprise bills and decide whether DIY or a pro is the right route.

What the Oven Control Board Does

The control board is the oven’s brain. It receives signals from the thermostat, tells the heating element when to turn on, runs the clock, and powers the touch‑screen or knob display. In modern ovens, it also talks to Wi‑Fi modules for smart features. When any of those signals fail, the oven either won’t heat, heats unevenly, or throws an error code.

Typical Price Range in 2025 (Australia)

Across most brands - from budget models to high‑end French‑door ovens - you’ll see a similar cost structure:

• Control board part: AU$120 - AU$250
• Labor (2‑3hours): AU$80 - AU$150
• Service call fee (if any): AU$30 - AU$70

All together, the oven control board replacement cost usually lands between AU$230 and AU$470. Premium brands like Miele or Wolf can push the part price toward AU$300, while basic models from brands like Breville stay closer to the lower end.

Factors That Push the Price Up or Down

Understanding why the final number varies helps you control the bill:

1. Brand and model year: Newer models often use proprietary boards that only the manufacturer stocks.
2. Warranty status: If your oven is still under a manufacturer’s warranty (often 2years for parts), the board may be free - you just cover the call‑out.
3. Location: Technicians in major cities like Sydney or Melbourne charge higher labor rates than regional areas.
4. DIY vs. professional: Buying the part yourself can shave $30‑$50 off, but you need the right tools (multimeter, screwdriver set) and confidence.
5. Hidden damage: Sometimes the board fails because of a burnt‑out heating element or faulty wiring. Replacing those extras adds $50‑$120.

Step‑by‑Step Cost Breakdown

Do It Yourself? When It Makes Sense

If you’re handy and have a basic appliance repair technician skill set, DIY can save $30‑$80. Here’s a quick checklist before you start:

• Turn off power at the breaker - never rely on the oven’s plug alone.
• Have a multimeter on hand to test voltage on the old board.
• Take photos of wiring connections before you disconnect anything - it makes re‑assembly foolproof.
• Wear insulated gloves and keep a fire‑extinguishing blanket nearby.
• Check the manufacturer’s service manual for board removal instructions (often downloadable from the brand’s website).

Typical DIY time: 1½-2hours. If you hit a snag - for example, a sealed metal case that requires special Torx bits - call a pro before you damage the oven further.

Hiring a Professional: What to Expect

When you call a local repair service, they usually follow this workflow:

1. Initial phone assessment: They ask about error codes and symptoms to confirm the control board is the likely part.
2. Quote: A written estimate that lists the board price, labor, and any additional parts.
3. Appointment: Most technicians arrive within 24‑48hours for non‑emergency calls.
4. Replacement: They disconnect the power, remove the old board, install the new one, and run a diagnostic test.
5. Final check: The oven is run through a full bake cycle to verify temperature accuracy.

Good technicians will also inspect the heating element and thermostat while they’re inside the oven. Spotting a failing element early can prevent another repair bill later.

Warranty and Insurance Tips

Before you sign anything, ask these questions:

• Is the control board covered under the manufacturer’s warranty? If yes, you may only pay the service call fee.
• Does the repair service offer a guarantee on parts and labor? A 12‑month guarantee is common.
• Will my homeowner’s insurance cover the repair if the board failed due to an electrical surge? Some policies do, but you usually need a quote from a licensed electrician.

Keeping the original receipt and a photo of the old board helps if you need to claim warranty later.

Key Takeaways

• The average oven control board replacement cost in Australia sits between AU$230 and AU$470.
• Brand, warranty status, and hidden damage are the biggest cost drivers.
• DIY can shave $30‑$80 if you have basic tools and confidence.
• Professional service usually includes a diagnostic run and a 12‑month guarantee.
• Check warranty coverage and insurance options before paying out‑of‑pocket.