How to Reset an Electric Hob in Just a Few Steps

If your electric hob isn’t heating or shows an error code, a quick reset can often do the trick. Most modern hobs have a built‑in safety reset that clears glitches caused by power spikes, overloaded burners, or accidental button presses. Follow these easy steps and you’ll have your kitchen back to normal without needing a full service call.

Step‑by‑Step Reset Procedure

1. Switch off the power. Locate the main switch for the hob – many units have a dedicated on/off button on the control panel. If you can’t find one, turn off the circuit breaker for your kitchen. This cuts any lingering current that might keep the hob in a locked state.

2. Wait 30–60 seconds. Give the electronics a brief breather. This pause lets the internal circuitry clear any stored errors.

3. Turn the power back on. Flip the breaker or press the hob’s power button. Watch for the indicator lights – they should all go dark and then come back on, indicating a fresh start.

4. Test each zone. Turn on a burner at low power and see if it heats. If the hob lights up and warms up, the reset worked. If you still see an error code, note the number – it can help a technician diagnose the issue faster.

When a Reset Isn’t Enough

Sometimes a hob won’t reset because the problem is deeper than a simple glitch. Here are the most common reasons a reset fails:

• Faulty heating element. If a burner stays cold even after a reset, the element may have burned out.
• Damaged control board. Repeated power surges can fry the electronic board that runs the hob.
• Loose wiring. Vibration from daily use can loosen connections behind the cooktop.

If any of these sound familiar, it’s time to call in a professional. Trying to dismantle the hob yourself can be risky – the high voltage inside can cause shocks, and you might void any warranty.

At Rugby Appliance Repair Services we specialize in electric hob repairs. Our technicians can spot a bad element, replace a control board, or tighten a loose wire in under an hour. We also offer same‑day service for urgent kitchen breakdowns, so you won’t be stuck ordering take‑away for long.

Before you pick up the phone, try one last safety check: make sure the hob’s surface is completely cool and dry. Never attempt any repair with the power on, and never pry open the glass surface unless you’re a certified electrician.

In most cases, a simple reset will get your hob cooking again within minutes. Keep this guide handy, and you’ll know exactly what to do the next time the burners act up. If the problem persists, give Rugby Appliance Repair Services a call – we’ll have your kitchen humming back to life fast.